5.08 pieces electric riveting press
Model: B-M5.08-D-1

Purpose:
Cixi Boimi Electronic Trade Co., Ltd produced 5.08 pieces electric riveting press can Riveting Hiroaki series of new 5.08-O, 5.08U, 5.08A1,5.08A2 and other pieces. The device allows users to reduce input costs while achieving diversification of production. Riveting equipment properly designed to ensure the reliability and stability can be more film circuit.
Procedure:
1. Determine the device is powered on, make sure the trip is set to "single."
2 pieces required number of actual riveting artificial cut is completed. For example: Riveting 10PIN, should cut two 5PIN; riveting 7PIN, should cut some 3PIN, some 4P. Other PIN so reference.
3, the finished cut pieces into a mold positioned within the spacer, involves two pieces stacked, it must be placed flat.
4, the film wire sheet placed on the spacer in the mold, line and stamping aligned front end of the sheet against the spacer positioned upright surface backing, depress (or press) switch that is riveting press molding.
5, the rear end of the artificial break off pieces of tape, careful not to wreck the film line.
Care instructions:
1, the class must add oil lubrication points before use.
2, riveting mold must be kept clean, do not deposit copper scrap and other impurities.
3, non-professionals do not disassemble the punch and die. Hiroaki contact must be removed when the company, after the company's professional guidance before proceeding.
Job security requirements: the pieces into the mold, the sheet is aligned riveting, the operator must leave your hands die stamping parts, before stamping.
Warranty:
1, this device mold, Hiroaki company lifelong labor costs for maintenance.
2, replacement parts will be charged the cost of parts.
3, Hiroaki back and forth during the company's equipment maintenance from the use of factory shipping by the use of manufacturers.
Disclaimer:
1, not in accordance with the care instructions for maintenance, aging machinery, man-made, non-resistance and other external damage; failure to operational requirements of the operating result in personal injury, Hiroaki company does not assume any responsibility.
2, use our riveting equipment, recommend using pieces Division I offer you. Products for any loss arising as with Division I Riveting equipment Riveting not my Division, I shall not be liable



The new generation of machines updated, Hiroaki company will not be sold machine synchronized updates.